Epoxy Products

Always have the best solutions in insulators tailored to your needs.

Indisol’s main products are electrical insulators and encapsulated solutions for low voltage (LV), medium voltage (MV), high voltage (AT) and very high voltage (MAT) in epoxy resin.

• Custom made insulators for medium voltage switchgear, such as fuse holders and bushings;
• Custom made insulators for use in high voltage transformers;
• Insulators for indoor and outdoor applications for LV/MV/HV;
• MV sensors tailored to each costumer needs
• Capacitive MV sensors for network monitoring and PLC communication;
• Special insulating articles defined by the customer and treated on a case-by-case basis.

SmartGrid [+]

Indisol

Image hover effect image

GIS products [+]

INDISOL

Capacitive Voltage Divider [+]

Indisol

Image hover effect image

Bushing [+]

INDISOL

Resistive & Capacitive Insulator Dividers [+]

Indisol

Image hover effect image

Supporte Insulator [+]

INDISOL

Costumized HV/MV products [+]

Indisol

GIS products

The critical components of SF6 insulated T&D equipment are, first, the medium voltage bushings, then all the others that isolate the HV circuits, such as the SF6 medium voltage bushbar supports, the medium voltage fuse tubes and the medium voltage circuit breaker chambers. The small dimensions of this equipment place the insulators and bushings under very high electrical stress, so that all our products for SF6 are tested at 100% industrial frequency, partial discharges and examined by X-rays, to ensure maximum safety and reliability. Get in touch with us to find out more.

Capacitive Voltage Divider

Voltage sensors and indicators are used to detect the presence of voltage or accurately measure the same voltage on the busbars of energy distribution equipment and installations. The voltage indication system essentially consists of a capacitive voltage divider between the conductor and earth. They can be used in Medium Voltage switchboards, in electrical installations or work under voltage. Due to the know-how obtained in the last 20 years, Indisol, in addition to developing its own solutions, also develops together with its customers, in order to better serve their needs.

Bushing

The critical components of SF6 insulated T&D equipment are, first, the medium voltage bushings, then all the others that isolate the HV circuits, such as the SF6 medium voltage bushbar supports, the medium voltage fuse tubes and the medium voltage circuit breaker chambers. The small dimensions of this equipment place the insulators and bushings under very high electrical stress, so that all our products for SF6 are tested at 100% industrial frequency, partial discharges and examined by X-rays, to ensure maximum safety and reliability. Get in touch with us to find out more.

Resistive & Capacitive Insulator Dividers

The divider insulators allow obtaining a low voltage electrical signal that reproduces an image of the Medium or High voltage in T&D equipment. In this way, they allow measuring and acting on the system. Voltage division can be obtained by resistive, capacitive or combined RC circuits, in order to provide information from DC to high frequencies, allowing measurement of the quality of electrical energy.

Supporte Insulator

Support insulators/Post Insulators, as the name implies, serve to electrically separate electrical conductors at different potentials, while performing mechanical functions. The “live” parts of the equipment, with high voltages and powers, are physically separated from the structure and surroundings of the installations, which will be at ground power. Facilities and people are protected and continuity of service is ensured.

At Indisol we produce these insulators according to the specific needs of each application, indoor, outdoor or for special environments such as SF6 or other dielectric fluids.

 For different electrical stresses, from low voltage to high voltage. With mechanical specifications, from efforts to traction, bending or torsion.

Insulators subject to systematic tests, both in-house and in external laboratories, where these electrical and mechanical specifications are validated.

Mounting lashings (threaded) follow the standards or customer needs.

Costumized HV/MV products

Everything that is in an energy transmission and distribution (T&D) equipment needs electrical insulation and that’s Indisol focus. Have the weirdest shape you can and the most particular and difficult specifications. These are the challenges that most motivate us and our way of being.

We put our skills at the service of the desires and freedom of TD equipment designers. With new performance and safety requirements and new environmental restrictions for TD installations, it becomes necessary to design new, more demanding and sometimes “out of the box” solutions. We are here to co-create with our customers and partners the insulating solutions that respond to your and our needs, for the sake of a more sustainable future.

Always supported by our’s in-house test in order to rest our clients.